The Slingshot Cycles 1 piece Stainless Steel Braided XS650 Brake Line allows you to run a single brake line from the master cylinder all the way to the caliper allowing you to ditch the multi line setup. This allows for a cleaner appearing setup and saves you a few ounces at the same time. This line will work on most XS650 models produced between 74-76 that have a single caliper on the right fork lower. Be sure to measure how long you want your brake line to be by measuring from one tip to the other. A line that is an inch or two too long is much easier to use than one that is too short so keep that in mind. ****Also, if you are using a master cylinder that has the outlet on the front face instead of the end like factory, be sure to mention that in the Special Order Comments so that we clock the ends correctly.**** Hoses are made in Richmond VA and come with a limited lifetime warranty.